ACT-19 · Review of clearances of the disc shafts.

Description

With the machine turned off and disconnected from the tractor and wearing protective gloves, grip each of the cut-off discs with both hands and check for abnormal clearances or vibrations while turning and balancing it by hand. In the event of clearance, you can carefully remove the engine from the disc that has clearance, and when you remove it you will access a nut that holds the shaft. Tightening this nut should solve the clearance problem. If the problem persists, it is best to contact the reference technical service.

Compatible machine families

BASIC-LBASIC-PCONDORID-REXNAKIRIOLIXPFPPFS-iPV-SETOV-DUALV1V5

Maintenance that uses this task

MaintenanceMachine families
MM-2 · Maintenance at 40 hours
AL-CALHALMOND-3BASIC-LBASIC-PBIOCOMBICONDORCULTIFRUTDAVICULTORDAVICULTOR 2.0DEADEFEAHECO-CUTECOFEEDECOTRIMEFIC-PFRONT-XLFRTI-DUSTI-GREENID-AID-DUALID-FRONTID-NAMICID-REVID-REXID-ROLLID-TERRAID-WEEDERID-XLLAT&GONAKIRIOLIXPFOPFPPFS-iPFS-i-CPROFEEDPRUNEXPV-LPV-L-RPV-SETOPV-TUNELPV-TUNEL-RPV-VIEWPV-VIEW-RPVORANNAREV-2RUNDERSURFEEDTD-FASTTD-KERRTD-LTD-RTD-SOTD-VIDTRIM-PROV-DUALV1V5VENTRALX-TREMEX10-TILLERgdgd

Associated resources

There are no associated resources

Back to Maintenance actions

Available in a future release