ACT-112 · Checking the straps of the cutter bars.
Description
With the machine turned off and disconnected from the tractor, start with the belt to which it directly serves the engine, in this pulley an M12 screw must be placed inside the central hole, once the screw is placed, loosen the screws of the base of the pulley and a scale must be attached to it and tensioned until the desired tension is reached, once this tension is reached, the screws of the base of the same must be tightened, repeat this process for the remaining belts. (The tensions at which they must be tensioned are 5 kg for the vertical axis and 7 kg for the horizontal axis. If the machine is going to be used for almond tree cultivation, it is recommended to apply a tension of 12 kg.
Compatible machine families
Maintenance that uses this task
| Maintenance | Machine families |
|---|---|
| MM-5 · Maintenance at 800 hours | AL-CALHALMOND-3BASIC-LBASIC-PBIOCOMBICONDORCULTIFRUTDAVICULTORDAVICULTOR 2.0DEADEFEAHECO-CUTECOFEEDECOTRIMEFIC-PFRONT-XLFRTI-DUSTI-GREENID-AID-DUALID-FRONTID-NAMICID-REVID-REXID-ROLLID-TERRAID-WEEDERID-XLLAT&GONAKIRIOLIXPFOPFPPFS-iPFS-i-CPROFEEDPRUNEXPV-LPV-L-RPV-SETOPV-TUNELPV-TUNEL-RPV-VIEWPV-VIEW-RPVORANNAREV-2RUNDERSURFEEDTD-FASTTD-KERRTD-LTD-RTD-SOTD-VIDTRIM-PROV-DUALV1V5VENTRALX-TREMEX10-TILLERgdgd |
Associated resources
There are no associated resources
Available in a future release